T0 trigger input board (module1), 26.5.2009

T0 DIM server was used to control the signal sent to CTP L0 inputs. All the inputs signals (toggling, signature, random, normal) were measured with snapshot memory, and gave results as expected. This should be repeated for module2 and later (July) for module1 with updated FPGA version.

signal	DIMchannel	CTPin	signature
0T0C	1	9	70
0TVX	3	10	72
0T0A	2	11	71
0TSC	4	12	73
0TCE	5	17	74

Note about 0T0A (see previous revison from 2008: the patch cable 16 connected between
Rack25/Patch panel/bottom/B/17 and CTPSwitch Rx-41 input is damaged: seems cable is OK -i.e. repaired by itself (toggling signature phase measurement is fine.